
* The HS9-X /X2 Rod Detector detects the movements of plastic-, paper-, textile,- or metal tapes, foils, bands or strips into each material, to rapidly stop the machine. * The detector sensitivities are at the highest level. * Depending on the band or tape specification, speeds lower than 0.05m/min. are detectable. * The detector system uses the same technology as the HS9 detector, but is equipped with a pizo-electric friction sensitive metal rod. * The rod is standard made in a hollow or massive Stainless Steel Material, with a diameter of 15 mm . * A special surface wear protection of the rod, such as a DLC-diamant coating or other hard coatings are available on demand. * Cooling : Possibility to let pass cooling liquids through the center of the rod, mainly , if very high tape or band speeds are increasing the temperature of the Metal Rod above 80C. ( 1/8" BSP Din 2999 INLET and OUTLET Rod cooling connection ) * The metal rod is earthed to discharge any electrostatic voltage, as a result of the possible high speed frictions of the used materials against this detection rod * The rod length is made in accordance with the application need.
![]() | ![]() | ![]() | ![]() |
| Programmable Weft Stop Motion Detector | Stop Motion Detector | Sewing Machine Thread Detector | The Standard WS-4 Yarn Motion Controller |




sending
enquiry
|