TECATRON electronics

Piezo-Electric Rod Detector Model : HS9-X / HS9-X2 MODEL HS9-X MODEL HS9-X or HS9-X2 : * The HS9-X /X2 Rod Detector detects the movements of plastic-, paper-, textile,- or metal tapes, foils, bands or strips into each material, to rapidly stop the machine. * The detector sensitivities are at the highest level. * Depending on the band or tape specification, speeds lower than 0.05m/min. are detectable. * The detector system uses the same technology as the HS9 detector, but is equipped with a pizo-electric friction sensitive metal rod. * The rod is standard made in a hollow or massive Stainless Steel Material, with a diameter of 15 mm . * A special surface wear protection of the rod, such as a DLC-diamant coating or other hard coatings are available on demand. * Cooling : Possibility to let pass cooling liquids through the center of the rod, mainly , if very high tape or band speeds are increasing the temperature of the Metal Rod above 80C. ( 1/8" BSP Din 2999 INLET and OUTLET Rod cooling connection ) * The metal rod is earthed to discharge any electrostatic voltage, as a result of the possible high speed frictions of the used materials against this detection rod * The rod length is made in accordance with the application need. ADVANTAGES Very fast reaction time Very High Sensitivity Speeds lower than 0.05m/min. are detectable depending on the band or tape specification No additional loads on the Tape or band In option :Special Hard coatings of the Stainless Steel Rod Surface depending on each application Custom made length of the metal detection rod. Automatic time overlapping for discontinued non regular movements during the start and during the detection control time Easy adjustment of the detection sensitivity Detector housing of robust CNC-mill Aluminum Input Voltage Controller Unit : 24 V AC/DC Output Contact : relay opened and closed - 5A max. current Dimensions D.