Infant Radiant Warmer is innovatively designed to meet thermoregulatory requirements of new born infants, who suffer extremes of heat loss. The system can be used in delivery rooms and Neonatal Intensive Care Units. The micro control based servo control system detects minute variations in skin temperature and adjust the ceramic infrared heater output to maintain the infant’s temperature at a prescribed pre set level.
Silent Features :-
- The controller is based on Micro computerized system.
- Large bright displays are easy to monitor and for viewing from a distance.
- Double digital display system provided to measure the Infant temperature and to set the required temperature.
- Feather touch keys provided for easy operation.
- LED system provided to indicate the heater output.
- Manual control system provided.
- Fault Indications with alarm for.
- Baby probe failure.
- 1°C temperature high.
- 1°C temperature low.
- High temperature cut-off.
- Power failure.
BABY PROBE :-
Baby probe is made of highly sensitive sensor and is interchangeable, field calibration taken care of by software the probe is made up of silicon sheathed cable, which allows easy cleaning.
OBSERVATION LAMP :
A halogen based observation light focus on any area on the bed.
Single element CE approved ceramic heater placed in a parabolic reflector.
BABY TROLLEY :
A detachable baby trolley which consists of large baby tray & is made of stainless steel frame with three side acrylic collapsible walls. Trendelenburg & Fowler system provided.
PHYSICAL PARAMETERS :-
- Dimension : 700x430mm (LxW)
- Thickness : 25mm
- Working level from ground : 900mm
- Baby tray is tilt angle on either side : ±8° max.
- Weight approx : 35kg.
- Castors : 50mm with 2 brake wheels and 2 non-brake wheels
ENVIRONMENTAL SPECIFICATIONS :-
- Operating temp. range : 20°C to 33°C
- Storage temp. range : -25°C to 60°C
- Operating humidity range : 0-100%RH
SKIN TEMPERATURE PROBE :-
- Range : 28°C to 38°C
- Accuracy : +/-0.2°C within range
- Resolution : 0.1° C
- Probe interchangeability :+/-0.2°C (Servo)
- Heater output controllable from 0 to 100% in
Manual mode (continuously variable)
ELECTRICAL SPECIFICATIONS :-
- Electrical Supply 230 V ± 10%, 50 Hz
- Power consumption with Heater at max. Output 650W