Triton Anti-mould Emulsion is a premium quality, low odour anti-mould coating which is guaranteed to protect against Black Mould even in cases of persistent condensation. The anti-mould biocide is combined throughout the paint film, which is formulated to impart toughness, elasticity, water resistance and durability to the surface finish.
Application: Following the application of Triton Surface Cleanser, Triton Anti-mould Emulsion can be used as a primer for new or porous surfaces (thinned up to 10% with clean tap water). Allow primer coat to dry thoroughly. Apply two coats of Anti-mould Emulsion using a brush or roller, allowing sufficient drying time between coats.
Coverage: 10-12m2 per litre but an extra allowance should be made for rough or porous surfaces.
Drying Time: Touch dry in one hour and re-coatable after 2-4 hours.
Colours: Brilliant White and Magnolia.
Pack size: 2.5 litre (as a kit with Triton Surface Cleanser) and 5.0 litre.
Health and safety: The product is approved under the Control of Pesticides Regulations 1986 for use as directed (HSE No. 6308). In use it is very similar to conventional high quality emulsion paint.