EVERSHINE forms a thin, transparent, hard, glossy, abrasion resistant coating which is resistant to all chemical corrosion, environmental corrosion and protects your expensive silverware from tarnishing.
It retains the original beauty of the silverware permanently. The coating is completelytransparent on silver and enhances the reflectivity of the surface which gives the EVERSHINE coated article a brighter and glossier appearance than silver itself.
EVERSHINE forms a coating which has excellent adhesion to silver, copper, brass substrates.It forms a crystal clear film of pure SiO2 which is resistant to scratches, corrosion and thuspreserves the original shine of your silver ware.
It is extremely easy to apply and is durable, protecting your valuable silverware for years.
Preserves your silverware!
The coating is also hydrophobic and oleo phobic, thus making it very easy to clean andmaintain.
Protect your expensive, valuable silverware with EVERSHINE and keep it looking shiny andnew for ages.
The object to be coated should be completely free of moisture, oils and other contaminants.If coating silverware which is already tarnished, remove tarnish by using any tarnishremoving method and polish it to the best possible shine. The more you can shine yoursilverware the more shine it will retain. Remember that if you coat unclean surfaces thedefect will get locked in permanently. For new silverware, just clean the object free of anycontaminants with a solvent wipe with alcohol and dry it.
Put a small quantity of EVER SHINE solution to a cotton cloth and spread a light, even coat bywiping it on the article. Coat small sections at a time with horizontal and vertical strokes.Cover the entire section similarly. A thin light coat is enough to give you maximumprotection. Make sure that the whole surface is covered with the coating. Do all correctionswithin 5 minutes. Do not touch the surface after coating for at least one hour afterapplication. The surface will be dry to touch after one hour and can be used after 24 hours.Full cure will proceed slowly and take up to 2 weeks.
Precautions: Do not keep the bottle with solution open. Transfer a small quantity of liquidinto another clean bottle and close the bottle immediately. Use the liquid in that bottle forapplication. Do not put back any leftover liquid after application in the second bottle backinto the main bottle. The liquid reacts rapidly with moisture in the air and solidifies rapidly.