Tyco Electonics Limited

PI MODULUS3 cable assemblies are the result of pre-engineering solutions geared to optimize design and take advantage of volume purchasing and manufacturing efficiencies. Forming the foundation of the platform are two true coax configurations-50 and 75 ohm. True coax completely shields each signal line to provide better consistency and signal protection compared to other non-coaxial constructions. The entire interconnect systems [2.5 meters (98 inches)] is designed to maintain crosstalk at less than -30dB at 10 MHz on the finished assembly (less than the inherent acoustic crosstalk found in most transducers.) For EMI/RFI containment, the cable assembly system is designed for continuous shielding end-to-end including connector actuation shaft. The enclosure also houses a nickel zinc ferrite to help suppress noise in the 20 to 300 MHz range.