Welcome to HelloTrade!
I Want to Buy
Request for Quote

Anritsu MD8480C Signalling Test System

Next Product »
Yes! I am interested
FOB Price : Get Price

Anritsu MD8480C Signalling Tester w/Opt. 02 Condition: Used The MD8480C W-CDMA Signaling Tester has been specifically designed for developing and testing 3GPP wireless devices including protocol stacks, chipsets, and application software. Supporting W-CDMA, HSPA, HSPA Evolution, GSM, GPRS and EGPRS services in a single unit, it is the first HSPA signaling tester in the industry, and the only one with full HSPA capability including 42 Mbps DL/11 Mbps UL maximum data throughput. The MD8480C air interface fully complies with the 3GPP recommendations. The MD8480C provides chipset and wireless device encoding/decoding tests and regression testing as well as protocol sequence tests such as registration, origination, termination, handover (option), and UE/NW release. It also supports application tests for voice communication, packet communication, and end-to-end communication (using two MD8480C units). Optional GSM/GPRS/EGPRS features allow testing handover between W-CDMA/HSPA and GSM/GPRS/EGPRS. In addition, the MD8480C is well suited for the development of UMTS wireless devices supporting global bands and sophisticated application software. UE testing for W-CDMA/HSPA, GSM/GPRS/EGPRS support Application testing including HSPA protocol compliance Interoperability testing for wireless devices and networks Research and development of W-CDMA/HSPA (UMTS) chipsets Modulation/demodulation tests for W-CDMA/HSPA mobile devices Achieves 42 Mbps maximum data downlink throughput Configurable for up to 4 base stations for handover testing and other multi-system tests Simulates BTS of W-CDMA/HSPA and GSM/GRPS/EGPRS systems Protocol sequence tests for mobile devices such as call set-up and registration Flexible settings for test parameters and sequences for protocol sequences Protocol Trace function Voice, circuit and packet switched application testing such as AMR voice, IP, PPP and ISDN BER and BLER W-CDMA receiver measurements MD8480C signalling tester specifications (for W-CDMA): Frequency range Tx: 300 MHz to 3000 MHz Rx: 350 MHz to 2700 MHz Maximum input level (total level) +40 dBm (Main connector) +20 dBm (Uplink connnector) RF input/output connector Main: N type, Impedance: 50Ω, VSWR: ≤1.3 Downlink 1: SMA type, Impedance: 50Ω, VSWR: ≤2.0 Downlink 2: SMA type, Impedance: 50Ω, VSWR: ≤2.0 Uplink: SMA type, Impedance: 50Ω, VSWR: ≤2.0 Reference oscillator Frequency: 10 MHz Startup characteristics: ≤±5 × 10 –8 (10 minutes after power-on, referenced to 24 hours after power-on) Aging rate: ≤±2 × 10 –8 /day, ≤±1 × 10 –7 /year (referenced to 24 hours after power-on) Temperature: ≤±5 × 10 –8 (0 to 40C, referenced to 25C) External reference input: BNC type, 10 MHz, 2 to 5 Vp-p Reference output: BNC connector, 10 MHz, TTL level Transmitter frequency resolution: 100 kHz Maximum Tx channels: 30 ch (120 ch maximum with option) Maximum Tx power Main: –25 dBm/ch Downlink 1: –10 dBm/ch Downlink 2: –10 dBm/ch Tx power setting range Setting range: 0 to –120 dB from Tx

  • Manufacturer
  • Anritsu MD8480C Signalling
  • Category Test and measurement, Testers

RELATED PRODUCTS
 

Share your requirement to get:
Competitive quotes
Wide range of suppliers
Convenience of buying
Convenient
Competitive Quotes
Choice of Suppliers
 
sending enquiry ....

unable to instantiate your call right now. please try after some time.

close

©Copyright HelloTrade.com