Welcome to HelloTrade!
I Want to Buy
Request for Quote

Hantek Mso5102d Digital Oscilloscope

Next Product »
Yes! I am interested
FOB Price : Get Price

1.Feature

  • 16 channels logic analyzer + 2 channels oscilloscope + external trigger.
  • Big and clear display (7.0-inch color LCD, high revolution 800 x 480), clear lifelike waveform display.
  • 1GSa/s real time sampling rate.
  • USB host, support flash memory card storage and USB interface system upgrade.
  • Ultrathin design, handy volume, easily portable.
  • VGA Optional

Oscilloscope Function

  • Bandwidth 100MHz.
  • Each channel record length up to 1M.
  • Real time sampling rate up to 1GSa/s.
  • Powerful trigger function.
  • 32 kinds of automatic measurement function.


Logic Analyzer Function

  • 16 channels divided into 2 groups which is able to setup threshold level individually.
  • Real time sampling rate up to 500MSa/s.
  • Powerful trigger function: edge, duration, pulse width, code-type, queen, repeat.

2. Specification

ModelMSO5102D
Acquisition
Sample RateReal-Time Sample: 1GS/s
Acquisition Modes
NormalNormal data only
Peak DetectHigh-frequency and randon glith capture
AverageWavefom Average, selectable 4,8,16,32,64,128
Inputs
Inputs CouplingAC, DC, GND
Inputs Impendance1MΩ±2% ???20pF±3pF
Probe Attenuation1X, 10X
Supported Probe Attenuation Factor1X, 10X, 100X, 1000X
Maximum Input VoltageCAT I and CAT II: 300VRMS (10×), Installation Category;
CAT III: 150VRMS (1×);
Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur.
Horizontal System
Sample Rate Range500MS/s--1GS/s
Waveform Interpolation(sin x)/x
Record Length1M
SEC/DIV Range4ns/div to 40s/div, in a 2, 4, 8 sequence
Sample Rate and
Delay Time Accuracy
±50ppm???at over any ≥1ms time interval)
Position Range2ns/div to 10ns/div;
(-4div x s/div) to 20ms;
Delta Time Measurement Accuracy
(Full Bandwidth)
Single-shot, Normal mode:± (1 sample interval +100ppm × reading + 0.6ns);
>16 averages:± (1 sample interval + 100ppm × reading + 0.4ns);
Sample interval = s/div ÷ 200

RELATED PRODUCTS
 

Share your requirement to get:
Competitive quotes
Wide range of suppliers
Convenience of buying
Convenient
Competitive Quotes
Choice of Suppliers
 
sending enquiry ....

unable to instantiate your call right now. please try after some time.

close

©Copyright HelloTrade.com