Wires : Stainless Steel external and internal wire
Color : Grey
CRYOTEC has been designed around several Polyester and Polyamides liners, supported by Stainless Steel inner and outer wires, with a weather-proof and abrasion resistant Polyester/Polychloroperne outer cover.CRYOTEC offers superior low temperature and high pressure characteristics. CRYOTEC includes in the construction an Polyester films. All the different layers are wrapped together and tensioned between internal and external wire spirals.
Specifically designed as a transfer hose in the production, distribution and use of cryogenic conveyants and liquefied gases under pressure at low temperature. CRYOTEC hoses are used in such applications as transfer for rail and road tanker loading and unloading, storage tank and in-plant applications. Large bore hoses are used for ship to shore and ship to ship applications, Cryogenic conveyants include the following products, as listed in Chap XIX IMO Gas Carrier code:Ammonia Acetaldehyde Butadiene Butane/Propane Butylene Carbon Dioxide Dimethylamine Ethylamine Ethylchloride Liquid ethane Liquid ethylene Liquid nitrogen Methane Methylacetylene Methylbromide Propadiene Propylene Vinylchloride Refrigerant gases
All hoses are tested at 11/2 times rated working pressure for safety and reliability, in accordance with BS 5842;1980 clause 6.4.Full test certification can be supplied on request.Burst pressure indicated, is at ambient temperature when tested in accordance with BS 5173 section 102.10.1990.Electrical continuity is achieved by the two wires bonded to the end fittings, this helps dissipate accumulated charge and to avoid static flash. The electric resistance of hose assemblies is less than 10 ohms, as required by BS 5842:1980 clause 6.2It is possible, on request, to offer a range of hoses with fire and flame resistance CL 1, please contact COMPOTEC Technical Department for further information.
Temperature range - 200C + 80C