We are Offering a wide range of Handling & Maintenance.
INSTALLATION : The hoses must be supported to allow normal movement when under pressure (dimensional variations).
NORMS AND METHOD OF USE : Prior to installation it is necessary to check the characteristics of the hose carefully to ensure that type, diameter and length conform to the required specification.
MAINTENANCE : Even when choice, storage and installation is carried out correctly, regular maintenance is necessary. Frequency of the latter is determined by use. During regular checks, special attention must be paid to couplings and to appearance of irregularities which can indicate deterioration of the hose, After use, it is advisable to empty the hoses carefully and if necessary, clean thoroughly. We recommend in any case, that the hoses be checked and tested under pressure once a year,
STORAGE : Hose must be stored in a relaxed condition free from tension, compression or other deformation. Contact with objects that could pierce or cut must be avoided. when not in use, hose should be stored in a dark place preferably, avoiding direct sunlight and rain. It must be protected from rodents and insists, When such a risk is probable, appropriate precautions must be taken.
NEVER weld reduction couplings or flanges onto original hose fittings,
NEVER close or hold the coupling ferrules in a bench vice as they could be deformed. If necessary, hold the hose itself, closing the vice onto the outside spirals of the hose.