Thermoplastic road marking Paint is a new generation highway marking system, preferred the world over, for its ease of usage and extended life cycle as compared to conventional solvent based paints.
Thermoplastic paints are also environmentally, more friendly with no carcinogenic solvents used.
Products and Specifications:
Visiontek Makes a Full Range of Road Marking Paints with Customized Blending to Suit Different Climatic Conditions of Usage. We Have Products to Comply with Mort&h (India), Bs and Aasto, Besides Other International Standards.
- Morth White
- Bs White
- Bs Yellow
- Glass Beads
Visiontek has a complete in house application team with world class Fully Automatic Machines, operator propelled machines, pre melters and other relevant equipment to undertake small to mega size contracts on turn key basis.
|Colour Composition||White & Yellow||Colour Composition||White & Yellow|
|Glass Beads||Min. 30%||Glass Beads (Intermix)||Min. 20%|
|T iO2 (For White)||Min. 10%||A ggregates including glass beads, pigment and extender||80 2%|
|Fillers (For White)||Max. 42%||Softening Point||G reater Than 65 C|
|Softening Point||102.5 9.5 C||Glass Beads (Intermix)||6088 A|
|Glass Beads (Intermix)||Type I -MOST /BS 6088||A Yellowness Index (For White)||Not more than 0.12|
|Yellowness Index (For White)||Not more than 0.12||Drying time||Max. 15 minutes|
|Drying time||Max. 15 minutes||Daylight Luminance 45 C|
|Daylight Luminance 45 C||White||Min. 70%|
|White||Min. 70%||Yellow||Min. 50%|
|Yellow||Min. 50%||Flow Resistance||Not more than|
|Flow Resistance||Not more than 25%||Colour||White & Yellow|