MAKE IN INDIA ( 100 % India Make)
Model no :-2000A -3000A12V
Input Voltage :- 300-480V 50 HZ
Output Voltage :- 0-12 ± 1 % ( Calibration by 0.1 V)
Output Power :-24000W-3600W
Overall efficiency :- 90 %
Power Factor :- 0.9 to 0.95
Cooling :- Force Cooling
Operating Temperature :- 0-80 °C ± 5 %
LCD Display 4 Line 20 Character Manual selection Constant Current & Constant Voltage. Display :- Constant current , Constant voltage , Input voltage high & low cut-off , Short circuit protection , Over temperature , Over load protection on display
Manual & Control Constant Current & Constant Voltage ( 0-5V) PLC
Configuration :- IGBT Base H-Bridge PWM technology
Operating Switching Frequency :-15 KHZ
1. High - Low Input Voltage Cut-off (380-480V AC 50 HZ) By Hall Voltage Sensor
2. Over temperature ( 65°C ± 5 %)
3. Over current from primary & secondary feedback by Hall current Sensor (response time < 3 u second )
4. Vdset Protection
5. Short circuit by input current & output current limit overload
6. Feedback mode after 110 % continue.
7.Enhance cathode current density, With strong penetrability and adhesion, it can significantly
quick deposition rate of the plating coating , reduce the internal stress of coating , eliminates the
hydrogen embrittlement, coating crystallizes will be more smooth and bright.
8. Standard antiseptic remote control box, Separate the power from plating tank, increases the product service life .
9. The case uses spray process ,The control system is sealed and isolated ,the internal structure adopts design of the
resistant alkali and acid .Greatly increases the product service life
Control Card :-DSP controller Single IC
Maintenance :-Fast maintains due to DSP controller
Construction of Outer Body ,Small size, light weight, high efficiency and high control precision.
Isolation :-Isolation control card by high voltage & current
Automatic load selection :-Automatic load selection in constant current & constant voltage mode
Application NIkel , Electroplating , Chrome, Anodizing , Water treatment