Weld Engineering Co.,Inc

For direct mounting on most manufacturer's pressurized flux feed tank. screws on top of tank in place of pressure cap in minutes! powerful electric flux recovery system. revolutionary (patented) self-cleaning dust and fines filter. dust and fines collected in dust bag for easy dumping. fused slag is automatically separated from flux. flashing light tells operator when to clean dust bag. flux is tranferred from upper recovery chamber to lower pressure tank by turning a simple hand-wheel valve.

Powerful electric flux recovery system. Revolutionary (patented) self-cleaning dust and fines filter. Dust and fines collected in dust bag for easy dumping. Fused slag is automatically separated from flux. Flashing light tells operator when to clean dust bag. Pressure flux tank feeds flux to remote welding gun. Adjustable and locking pressure flow regulator. Flux is tranferred from upper recovery chamber to lower pressure tank by turning a simple hand-wheel valve. Portable and easily moved.

The PT-"x"00 is a flux pressure feed tank system for pressure feeding flux to a flux hopper or weldinf torch. Many tank sizes available, ie. 100 lb., 300 lb., 600 lb., or larger. PT-3 (60 pound tank) PT-100 (100 pound tank) PT-300 (300 pound tank) PT-600 (600 pound tank) Electronic low or high flux level sensor is an option available for all size pressure tanks. HPT-"x"00 Heated Flux Pressure Feed Tank. Same as above but is heated to 250°F (121°C), adjustable. HPT-"x"00/D Heated Flux Pressure Feed Tank with Built-In Dryer Unit. Incoming shop air first passes through an oil and water trap, then a micron filter, and then through a refrigerated air dryer, before finally pressurizing the flux tank with very clean dry air.