Wika Alexander Wiegand SE & Co. KG

Applications * Automation engineering * Test benchs * Laboratories * Maintenance shops Special Features * High accuracy up to < 0.05 % * No additional temperature error in the range of 0 ... 50 C * Communication software EasyCom e.g. for zero and span adjustment * Flush diaphragm pressure connections

Applications * Food and beverage industry * Pharmaceutical industry * Biotechnology industry * Sterile process technology Special Features * Flush diaphragm with a surface roughness of Ra < 0.4 μm * All welded construction * 3-A and EHEDG certified * Ingress protection up to IP 67 * Aseptic process connections

Applications * Refrigeration and HVAC applications - Compressors - Condensers - Chillers Special Features * Wetted parts of brass, CR70 (chloroprene) and ceramic * Resistant against the most important refrigerants * Special design for the best possible condensation tightness

Applications * Refrigeration and air-conditioning * Condenser * Compressor * Water cooler Special Features * Wetted parts out of stainless steel * Pressure transmitter is resistant against refrigerants * Designed for a best possible condensation tightness * Customised pin configuration possible

pplications * Calibration service companies/service industry * Instrument and control workshops * Quality assurance Special Features * Cycle time setable from 1 ms to 10 s * Measuring ranges from -1 0 up to 0 1000 bar and from 0 ... 0,25 up to 0 ... 25 bar absolute * Accuracy 0.2 % * Connection to PC via USB adapter CPA2500 * No separate power supply necessary * Software USBsoft2500 for configuration, recording and evaluation pressure transmitter model CPT2500 with USB adapter model CPA2500 Description The CPT2500 pressure transmitter can, with the aid of the CPA2500 USB adapter, be connected to any PC that has a USB serial port.Using USBsoft2500 software, delivered as standard with the USB adapter, all settings for the recording of pressure profiles can be made. The collected measuring values can be graphically displayed and analysed. The cycle time can be set in the range between 1 millisecond and 10 seconds. For measuring times of over 5 ms, in addition to the actual measured value, the average value over the measuring time and the maximum and minimum values during the measurement time can be recorded. Thus pressure peaks can be detected very easily throughout the entire period that is recorded.Likewise it is possible, to define conditions for start and finish of the recording, and in this way an individual pressure peak of up to 1 ms can be captured. The CPT2500 is thus very well suited to all applications, where the pressure profile needs to be recorded over a defined time period and analysed with high resolution. For simple transportation the USB adapter is delivered in a compact carry case, which can also house one or more pressure transmitters.