Clamping Wila Clamping Systems are state of the art in every aspect. Their speed, reliability, safety, and overall performance are unrivaled. These qualities are packaged in a very compact design, without any external moving parts, providing maximum bending freedom.The clamping operation is quick and easy, and most often automatic. Hydraulic Clamping Clamping is achieved by means of a flexible hose which is integrated in the clamping system over the entire length, whereby hydraulic oil pressure (max 50 Bar) is transferred to the tools via hardened clamping pins. Manual Clamping If tooling changeover is not often required, there are also manual clamping systems in the program to select from. In the manual systems, clamping bolts are pushed against a strip, which position and center the tools. When the clamping is activated, all tools are automatically seated, centered and aligned. Wila provides these systems in the following lines: New Standard Premium Clamping System New Standard Pro Clamping System American Style Clamping System The Wila New Standard and American Style Clamping systems offer: The fastest tool changeover. Automatic clamping, seating and aligning. Individual clamping of each tool segment. Vertical and horizontal tool changeover. Professional finish with an aluminum cover strip, including an integrated ruler. Available for use on all new or current press brakes. Hydraulic New Standard Clamping Systems for Automation Together with Wila’s Universal Press Brake Concept, with the optimal control of Tx alignment, and the New Standard tools, the hydraulic New Standard Clamping systems are especially suitable for automatic tool changeovers with the utilization of robots. Hydraulic Power Pack For all the hydraulic clamping systems, Wila supplies a suitable Hydraulic Power Pack with either remote control operation or operation via the press brake control.