Winic Corporation

Features:
●Multi-function PCI Bus Specification 2.2 and Power
Management 1.0 compliant
●Fully software compatible with 16C450, 16C550,
> 16C650, 16C750 and 16C950 UARTs
●Supports Big Endian byte-lane conversion
●Supports Plug and Play using optional non-volatile
configuration memory (EEPROM)
●Pass-through function supports 8/32-bit Local Bus
running asynchronous to PCI clock UARTs, Local
Bus and Parallel port
●configured with IO or memory base address
●Local Bus offers up to 4 chip selects mapped to
4-256 bytes of I/O and 4-16K of memory address
space
●12 multi-purpose IO pins which can be configured
to interrupt input pins
●Serial ports offer Good-Data status
●Flexible baud rate clock prescaler
●128-byte deep FIFO per transmitter and receiver
●Four full-duplex asynchronous channels IEEE1284
> EPP parallel port
●Multi-function target PCI controller facilitates using
generic device drivers in combo
●Baud rates up to 15Mbps in asynchronous mode
and 60Mbps in isochronous mode
●Isochronous mode using external x1 baud rate
●Automated in-band flow control using programmable
Xon/Xoff in both directions
●Automated out-of-band flow control using CTS/RTS
and DSR/DTR
●Readable flow control status and FIFO levels Arbitrary
FIFO thresholds for interrupts and automatic flow control
●A: DB37 Pin Female Transfer to 4 Serial DB9 Pin
Male or DB 9 Pin Male(Default) with 1 Parallel(Optional)
●B: DB9 Pin Male x 2 pcs with 1 Parallel (2S1P)

Features:
●Multifunction PCI Bus Specification 2.2 and Power
Management 1.0 compliant
●Fully software compatible with 16C450, 16C550,
> 16C650, 16C750 and 16C950 UARTs
●Supports Big Endian byte-lane conversion
●Supports Plug and Play using optional non-volatile
configuration memory (EEPROM)
●Pass-through function supports 8/32-bit Local Bus
running asynchronous to PCI clock UARTs, Local
Bus and Parallel port
●configured with IO or memory base address
●Local Bus offers up to 4 chip selects mapped to
4-256 bytes of I/O and 4-16K of memory address
space
●12 multipurpose IO pins which can be configured
to interrupt input pins
●Serial ports offer Good-Data status
●Flexible baud rate clock prescaler
●128-byte deep FIFO per transmitter and receiver
●Four full-duplex asynchronous channels IEEE1284
> EPP parallel port
●Multifunction target PCI controller facilitates using
generic device drivers in combo
●Baud rates up to 15Mbps in asynchronous mode
and 60Mbps in isochronous mode
●Isochronous mode using external x1 baud rate
●Automated in-band flow control using programmable
Xon/Xoff in both directions
●Automated out-of-band flow control using CTS#/RTS#
and DSR/DTR
●Readable flow control status and FIFO levels Arbitrary
FIFO thresholds for interrupts and automatic flow control
●A: DB37 Pin Female Transfer to 4 Serial DB9 Pin Male
or DB 9 Pin Male(Default) with 1 Parallel(Optional)
●B: DB9 Pin Male x 2 pcs with 1 Parallel (2S1P)