WITCOAT TWO PACK EPOXY PAINT:
Witcoat Two Pack Epoxy Paint is a two component modified polyamide cured epoxy paint with high resistance to impact and abrasion. It is also resistant to Spillage of Petrol, Mineral oil, Vegetable and Animal oils.
As a finishing coat for protection of steel surfaces directly. Strongly suggested as a finish coat for Chemical plants & also in Fertilizers, Petrochemical Complexes, Thermal Power Plants, Mines, Bridges, Dock installation, etc. It has excellent corrosion protection in fresh and sea water.
Smooth & Semi Glossy to Glossy
Application Viscosity @ 300C
By B-4 Ford Cup
According to the requirement of the party
VOLUME SOLID % :
THEORETICAL SPREADING :
m2/ltr@35-45 microns dft.
FLASH POINT :
Above 25 0C
Abel Closed Cup
Dry to touch :
fully cured :
SHELF LIFE :
Months at 300C
MIXING RATIO : BASE: 4 parts by volume
CURING AGENT : 1 part by volume
POT LIFE : 4-6 hours at 30°C
APPLICATION METHOD : Airless spray ,Spray Brush
THINNER : Witcoat Epoxy Thinner
INDICATED FLIM : Dry: 35-45 micron (By Dft- Meter)
DISCLAIMER : The information contained within this data sheet is based on information believed to be reliable at the time of its preparation. The company will not be liable for loss or damage howsoever caused including liability for negligence, which may be suffered by the user of the data contained herein. It is the user's responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use No guarantee of results is implied since condition of use is beyond our control.