For use on saw benches, radial arm saws and snipper saws. For sizing cuts in Aluminium Extrusion of up to 10 mm wall thickness as well as Plastic Extrusion. Also used for sizing sheet Aluminium or Plastic. For saw blades where there is a choice of number of teeth for the diameter the following rule applies. The saw with the highest number of teeth are suitable for materials upto 4 mm wall thickness. With thicker material less teeth are required.
In all cases when cutting Aluminium or Rigid Plastic profiles the operator must ensure that the work piece is firmly clamped.
Sizes above 600 Dia upto 1020 mm available on request as per specification.
Note: 1. Special sizes on request, 2. Bore as required.