FOB Price : Get Price
Yansons Engineering Pvt Ltd is the first company in India to install the flash dryer plant to remove the moisture from the wet ash and also remove the foreign materials from the wet ash.
YEPL has successfully engineered and installed 100 TPH dry ash output plant at Shree Cement Ltd Beawer with 15% initial moisture in wet ash. We are engaged in exporting of moisture dryers, waste removal devices, flash moisture dryers etc.
The specification sheet of the 100 TPH plant is given below.
|Feed Specifications |
|Material to be handled ||Pond Ash |
|Concentration of moisture in feed ||15% |
|Feed temperature ||30°C |
|Typical Operating Parameters |
|Type of flash dryer ||Pneumatic Conveying type flash dryer |
|Dryer inlet temperature ||450°C |
|Dryer Outlet Temperature ||110 °C |
|MOC ||Carbon Steel |
|Moisture evaporation rate ||18000 kg/hr |
|Final Moisture required ||1% maximum |
|Dry powder output rate ||100 T/hr |
|Fuel used ||Available heat source of Hot gases |
|Hot gas required ||3,20,000 m3/hr at 450°C |
|Dust Emission level at the exhaust ||20 mg/Nm3 |
|Total connected electrical load ||725 Hp |
|Drying cost ||4.5 Kw/Ton of dry ash |