Yantai Sanxiong Electronics Co., Limited

3d wheel aligner model:sx-g6 characteristics of 3d wheel alignment 1. 3d cameras alignment—based on the car and not influenced by the platform 2. Measurement system—equipped with double digital cameras and four target disk, supplying revolutionary measurement mode 3. Target disk—there is no electronic components, so the wheel alignment will not has a component failure problem. 4. Equipment calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration 5. Measurement progress—no need to compensate for steel ring , the precise eccentric compensation will be just once pulling or pushing the car back and forth 6. Software system——easy to operate, complete conventional basic parameters within two minutes ,significantly faster than conventional aligners 7. Daily maintenance—easily maintenance , download and upgrade freely for the model data technical specification: measurement project accuracy measurement range measurement project display accuracy 1´/1mm display accuracy camber ±2´ ±10° camber caster ±6´ ±20° caster kingpin inclination ±6´ ±20° kingpin inclination toe-in & toe-out ±2´ ±20° toe-in & toe-out set back ±2´ ±5° set back thrust angle ±2´ ±5° thrust angle wheel deviation ±2mm wheel deviation axis deviation ±2mm axis deviation measurement project accuracy measurement range measurement project