Radiant Heat Warmer with attached baby cradle and 3 Drawer Storage (Skin/Air/Manual/Prewarm)
- Microprocessor based temperature controller
- Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not required)
- Modes of Operation: Skin Servo, Air, Manual and Pre-Warm.
- Skin mode: Temperature range: 34 to 38°C , Resolution : 0.1°C.
- Air mode: Temperature range: Room temp. to 39°C , Resolution : 0.1°C.
- Manual mode: Adjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins
- Pre-warm mode: To pre-warm the cradle before baby is placed on the bed,Time duration:30mins
- Overhead heater box: Swivelling with Ceramic heater (650 W).
- Halogen observation light (12V/50W).
- Operating Voltage: 220-240 VAC, 50Hz
- Power: 800W (Max.)
- Alarm: Audio alarm with 10 minute mute facility.
- Keypad Lock facility.
- Fire retardant composite enclosure
- Fixed height warmer with attached baby cradle mounted on 4" wheel
- SS baby tray with water proof, zipped cover mattress of density approx. 21-25 kg/m³
- Continuous head up/down facility
- X-Ray cassette holder
- Collapsible/lockable side panels made up of Unbreakable polycarbonate material
- Slots for sensor and ventilator tubing
- Side tray for placement of monitor, SS infusion rod with facility to mount Syringe/infusion pump and SS IV Stand
- Lower shelf below baby tray to facilitate under surface phototherapy.
1. RHW4001B- Series 4000 with B-Controller & 3-Drawer Storage
2. RHW4002A- Series 4000 with A-Controller only
3. RHW4002B-Series 4000 with B-Controller only