Zhongneng Oil Purifier Manufacture Co. Limited

It is used to treat unqualified hydraulic lube oil.The machine is a high vacuum machine with dehydration plant and three high-precision filters, which can remove water, impurities, gas thoroughly and quickly from all kinds of waste Lubrication oil and high viscosity oil, including mineral oil and lubrication oil and hydraulic oil and bunker oil. This machine can remove the water and gas from the oil quickly. Strong demulsifying and dehydration capability Machine is operated with high degree of automation , and the system is safe& reliable The equipment has compact structure and human oriented design for Environment. Adopt high precision and stainless steel FH rectangle filtration system that import from Japan, the precision of filter can reach up to 3-5 micron. Working principle When the oil purification starts, firstly contaminated oil enter into heater, secondly flowed into pre-filter under the difference pressure, in which the large impurities are removed. Thirdly oil goes into intermediate filter. Fourthly oil flow into water separator, the water separator adopts a special skill which changes the change the impaction of oil and water to speed up trace water and coagulate big water which is separated from oil and stored in water content. After that, oil passes through the fine filter and fine particles of matters is removed during the process. Finally oil flows into vacuum pump which use stereo-evaporation removing residual trace of water and steam is condensed in the condenser or expelled out by the vacuum system. The oil was transported out by oil pump. The purification process has finished.