Paper covered with PET/BOPP film, rigid PVC, ABS, PP.
General merchandise and publishing materials, such as food packaging, cosmetic, posters etc.
Have good adhesion, flexibility, glossiness and flow capability to most of the matt paper and some of the gloss paper.
Yellow changing resistance
Monofilament mesh, 120-152T, tensility 13-15 N/cO
65-75 durometer solvent resistance blade, such as PU
Approx. 35-40O/kg under 140T mesh
By Ultra Violet curing machine, use 2 high/medium voltage mercury-vapor lamp at least 5KW to ensure sufficient UV power for curing.
Use UVH-1 thinner to reduce viscosity of the varnish, UVH cure promoter to improve cure speed.
Use organic solvent to clean the stencil, do not print until it is totally volatilized.
1 As the UVH-Matte varnish has excellent flexibility, it may cause the phenomena of sticky and bad flow ability. To solve the problem, printer should churn up the varnish even and ensure good ventilation for the curing machine, take note to reduce the temperature of the paper, avoid stacking together to cause conglutination. Recommend to refrigerate by fan and place separately.
2 Take note of protection as some component of the varnish may be harmful to our skin. For skin contact, wash thoroughly with soap and water. For aye contact, flush thoroughly with waterand then send to hospital. Change the cloth if it is adhered with varnish.
3 Cleanness and treatment on the surface of the substrate is important factors to adhesion, it has good adhesion to substrates when the surface tensility is over 38 dynemake sure the tensility meets the printing requirement before usage.