PVC, PET, ABS, BOPP, PS and treated PP, PE.
PP mat, PP lamp-chimney, handbag, PVC and PC poster, PET and PP bottle, etc.
High gloss, anti-attrition and solvent resistance, fast solidification and good adhesion to non-absorb substrates.
Salt fog test
UVAS series ink for plastic
UVA- series ink for plastic
Refer to color sample
Monofilament mesh, black: over 152T, other colors: over140T. tensility 13-15 N/cO, avoid using too thick emulsion resulting in bad adhesion and curing capability.
70-75 durometer solvent resistance flat blade. For flex screen printing, use 70-75 durometer solvent resistance flat or acuate blade
Color inks: 32-35O/kg, white: 30-32O/kg, under 140T mesh.
By Ultra Violet curing machine, use 2 high/medium voltage mercury-vapor lamp at least 5KW for plastic sheet, 100w/cm-120w/cm high/medium voltage mercury-vapor lamp for flex screen printing.
Use UVAS-1# thinner.
Use organic solvent to clean the stencil.
1 This series of ink is suitable for plastic sheet and bottle printing, pretesting is required for the different requirements of adhesion, water resistance, solvent resistance, cold resistance and hot resistance.
2 The chroma of the ink, solification ability, production of mesh, voltage of curing machine and color priority of printing are important factors in determining printing effect when this series of ink is applied to flex screen printing. Please note to pretest before printing.